English
English
产品1
You are here: Home / Formwork & Scaffolding Solution / Formwork System / Single Side Formwork / Zeemo Single Side Concrete Retaining Wall Climbing Formwork

Hot Products

CONTACT US

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Zeemo Single Side Concrete Retaining Wall Climbing Formwork

  •  Max Pouring Height: 2.7meters
  • Lateral Pressure: ≤40MPA
  • Frame Space: ≤0.8m
Availability:
Quantity:
Inquire Add to Basket

  • ZM-SSW

  • ZEEMO

PERI SINGLE SIDE WALL FORMWORK SYSTEM

 It is a system used in Metro Station (Subway), retaining wall, curtain wall, Dam, Pier, Guy Anchor, Tunnel, Underground, car park, Workshop and rebuilt areas, basement, sewage treatment factory with single sided mold space problem.


 SS-186 system can be adjusted forward and backward. The Max. angle is 30°.

Single Side Wall

the pouring of concrete

1. The first pouring

The lateral pressure is supported by bottom beam anchor system during the first concrete pouring. Embedding wall anchor system which will be the most important supporting parts during the next pouring.


2. The second pouring(the first lift)

The climbing brackets are used in the second pouring, which are fixed on the anchor system in the finished wall.


3. The third pouring(the second lift)

Fix the suspend platform under the whole system, the workers can remove the tensile bolt and V-climbing cone on the platform and then fill the holes left by the V-climbing cone. The later lifts are standard same as the second lift until the concreting is finished.
anchor rod of single side wall


application of retaining wall



Specification


1
WALING/WALER
2*[12] Q235
2
BEAM
H20 BEAM
3
PLYWOOD
18MM FILM FACED PLYWOOD
4
ANCHOR SYSTEM
Tie rod, big plate nut, anchor waling, gasket, connection nut, angle anchor rod
5
ACCESSORIES
scaffolding bracket, waling bracket holder, adjustment jack

concrete pouring in construction

56

Engineering Analysis

1. The lateral pressure of the concrete is entirely supported by struts, horizontal belts and permanent anchors, thus wall-through tie-rods and opposite wall panel are not needed.

2. The formwork can move backward entirety, which will be convenient for dismantle.

3.Coupling is used for connecting the neighboring forms to make sure the forms standing in a beeline.
4.The connecting components have a high standardization and versatility.

5.The formwork can prop to the finished concrete tightly to avoid offset or leakage.

6.The formwork can be adjusted horizontally or vertically as request.

7.As the single-sided formwork elements are connected to each other,they can be transported by means of crane.

8. Wall formwork is climbed unilaterally with climbing consoles.

9. The production is carried out in the welding robots of EN ISO 3834-3 quality standards.


Previous: 
Next: 
Concrete Single Side Formwork Concrete Retaining Single Side Formwork Retaining Wall Single Side Formwork Wall Climbing Single Side Formwork Concrete Wall Climbing Single Side Formwork Concrete Retaining Wall Single Side Formwork Single Side Wall Climbing Formwork Single Side Concrete Retaining Wall Formwork Single Side Concrete Wall Climbing Formwork Single Side Concrete Climbing Formwork
Copyright 2022 Shandong ZEEMO Construction Technology Co., Ltd. All Rights Reserver. Sitemap Supported