 |
| Size of LVL beams: | |
|---|---|
| Distance of LVL beams: | |
| Thickness of panels: | |
| Quantity: | |
ZM-STF
ZEEMO
Tank Formwork / Curved Wall
Our tank formwork is made of plywood with plastic coating on the surface, back, and edges.
1) It is lightweight compared to steel, making it easy to handle and install quickly, saving time and labor.
2) It offers a lower cost alternative to traditional steel tank formwork.
3) The formwork is easy to install and dismantle, allowing for efficient use and reuse.
4) No release agents are required, and the formwork can be easily cleaned with water due to its plastic surface.
5) The finished product is of high quality, eliminating the need for rework.
Choose our tank formwork for a professional and efficient solution for your curved wall construction needs.
Installation:
1) shape fixed , no need calibrate onsite
2) place the parts on the ground, joint the parts by fasteners.
3) props and supports.
Product Specification:
Size of LVL beams | Distance of LVL beams | Thickness of panels |
40x100mm | 200mm | 15mm |
Packing:
Technical Data:
Testing items | Unit | Standard used | Tested value | |
Bonding quality | N/mm² | EN314 | 0.72 | |
Bending strength | Longitudinal grain | N/mm² | EN310 | 50.0 |
Cross grain | N/mm² | 40.2 | ||
Elasticity in bending | Longitudinal grain | N/mm² | EN310 | 5137 |
Cross grain | N/mm² | 3519 | ||
Bearing concrete pressure | KN | EN310 | 70 | |
Other shape
Tank Formwork / Curved Wall
Our tank formwork is made of plywood with plastic coating on the surface, back, and edges.
1) It is lightweight compared to steel, making it easy to handle and install quickly, saving time and labor.
2) It offers a lower cost alternative to traditional steel tank formwork.
3) The formwork is easy to install and dismantle, allowing for efficient use and reuse.
4) No release agents are required, and the formwork can be easily cleaned with water due to its plastic surface.
5) The finished product is of high quality, eliminating the need for rework.
Choose our tank formwork for a professional and efficient solution for your curved wall construction needs.
Installation:
1) shape fixed , no need calibrate onsite
2) place the parts on the ground, joint the parts by fasteners.
3) props and supports.
Product Specification:
Size of LVL beams | Distance of LVL beams | Thickness of panels |
40x100mm | 200mm | 15mm |
Packing:
Technical Data:
Testing items | Unit | Standard used | Tested value | |
Bonding quality | N/mm² | EN314 | 0.72 | |
Bending strength | Longitudinal grain | N/mm² | EN310 | 50.0 |
Cross grain | N/mm² | 40.2 | ||
Elasticity in bending | Longitudinal grain | N/mm² | EN310 | 5137 |
Cross grain | N/mm² | 3519 | ||
Bearing concrete pressure | KN | EN310 | 70 | |
Other shape
