 |
| Material: | |
|---|---|
| Size: | |
| Quantity: | |
ZM-SBC
ZEEMO
Beam Clamp system
Beam Clamp system from ZEEMO Formwork is a better improvement over the traditional of reinforcement beam formwork by a tie rod free way on fasten tight and find support from the ground.
Fasten the beam formwork
Support the beam formwork
withstand the pressure from the beam formwork while concrete forming.
Installation
To fasten the beam formwork ,choose the right dimension beam clamp available from which 200mm to 600mm,place the fix end and bottom against to the formwork. Push the adjustable end against to the other side of the beam,plug in the wedge and fasten the clamp by knocking the wedge down by hammer.
Beam Clamp system
Beam Clamp system from ZEEMO Formwork is a better improvement over the traditional of reinforcement beam formwork by a tie rod free way on fasten tight and find support from the ground.
Fasten the beam formwork
Support the beam formwork
withstand the pressure from the beam formwork while concrete forming.
Installation
To fasten the beam formwork ,choose the right dimension beam clamp available from which 200mm to 600mm,place the fix end and bottom against to the formwork. Push the adjustable end against to the other side of the beam,plug in the wedge and fasten the clamp by knocking the wedge down by hammer.
