 |
| Quantity: | |
|---|---|
ZMCC-01
Zeemo
Our Tank formwork is made of plywood, plastic coated face/back/edge.can used around 20 times
How to install the curved wall
1.Shape fixed , no need calibrate onsite
2.place the parts on the ground, joint the parts by fasteners.
Advantage
1.lightweight than steel ,easy handling, quickly, save time and labour.
2.lower cost
3.easy installation, easy dismantle.
5.repeatable upto 20 times .
Packing & Delivery
Tank Formwork / Curved Wall
Our Tank formwork is made of plywood, plastic coated face/back/edge. then
1) lightweight than steel ， easy handling, quickly, save time and labour
2) lower cost
3) easy installation, easy dismantle
4) no need mold-release agent,water can clean, because surface is plastic.
5) nice finish ,no need re-work.
Installation:
1) shape fixed , no need calibrate onsite
2) place the parts on the ground, joint the parts by fasteners.
3) props and supports.
Product Specification:
Size of LVL beams | Distance of LVL beams | Thickness of panels |
40x100mm | 200mm | 15mm |
Packing:
Technical Data:
Testing items | Unit | Standard used | Tested value | |
Bonding quality | N/mm² | EN314 | 0.72 | |
Bending strength | Longitudinal grain | N/mm² | EN310 | 50.0 |
Cross grain | N/mm² | 40.2 | ||
Elasticity in bending | Longitudinal grain | N/mm² | EN310 | 5137 |
Cross grain | N/mm² | 3519 | ||
Bearing concrete pressure | KN | EN310 | 70 | |
Contact us 
Our Tank formwork is made of plywood, plastic coated face/back/edge.can used around 20 times
How to install the curved wall
1.Shape fixed , no need calibrate onsite
2.place the parts on the ground, joint the parts by fasteners.
Advantage
1.lightweight than steel ,easy handling, quickly, save time and labour.
2.lower cost
3.easy installation, easy dismantle.
5.repeatable upto 20 times .
Packing & Delivery
Tank Formwork / Curved Wall
Our Tank formwork is made of plywood, plastic coated face/back/edge. then
1) lightweight than steel ， easy handling, quickly, save time and labour
2) lower cost
3) easy installation, easy dismantle
4) no need mold-release agent,water can clean, because surface is plastic.
5) nice finish ,no need re-work.
Installation:
1) shape fixed , no need calibrate onsite
2) place the parts on the ground, joint the parts by fasteners.
3) props and supports.
Product Specification:
Size of LVL beams | Distance of LVL beams | Thickness of panels |
40x100mm | 200mm | 15mm |
Packing:
Technical Data:
Testing items | Unit | Standard used | Tested value | |
Bonding quality | N/mm² | EN314 | 0.72 | |
Bending strength | Longitudinal grain | N/mm² | EN310 | 50.0 |
Cross grain | N/mm² | 40.2 | ||
Elasticity in bending | Longitudinal grain | N/mm² | EN310 | 5137 |
Cross grain | N/mm² | 3519 | ||
Bearing concrete pressure | KN | EN310 | 70 | |
Contact us
