You are here: Home / Accessories / Scaffold Accessories / LVL Plank / Timber Suppliers Australian Standards Long Lvl Timber Beams Indoor F17 Lvl Lvl Beam

Hot Products

CONTACT US

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Timber Suppliers Australian Standards Long Lvl Timber Beams Indoor F17 Lvl Lvl Beam

LVL (Laminated Veneer Lumber) is a kind of plywood which is made from Peeling or chipping veneers. After drying and gluing the veneers, we put all of them or most of them together transversely, then hot press them. If all of the veneers are put transversely, we call it LVL.
Availability:
Quantity:
  • ZM-SP14

  • ZEEMO

Specification

Timber Suppliers Australian Standards Long Lvl Timber Beams Indoor F17 Lvl Lvl Beam


LVL (Laminated Veneer Lumber) is a kind of plywood which is made from Peeling or chipping veneers. After drying and gluing the veneers, we put all of them or most of them together transversely, then hot press them. If all of the veneers are put transversely, we call it LVL.
scaffold plank
lvl plank
wood plank
Size
Width 225 mm * Length: 500/1000/1500/2000/2500/3000/4000 mm
Thickness
38mm
Tolerance
+/-1mm
Core
pine,Larch
Glue emission level
Carb P2(EPA), E0,
Usage
scaffolding planks
Moisture Content
12%~15%
Product Description
wooden planks

FEATURES
1.Flat, beautiful, Low moisture content, Without moldy effect;
2.High design values for bending, stiffness and shear strength ;
3.Resists shrinking, warping, splitting and checking ;
4.Ordinary nail assembly - installs as easily as ordinary lumber;
5.High strength-to-weight ratio - more than 40 stronger than solid sawn products

TEST RESULT
SPECIMEN SPECIFICATION
38*225*3048mm ( Thickness * Width * Length )
Test Item
Test Method
Test Result
Standard
Conclusion
Stiffness Test
AS/NZS
1572013
Appendix A
Load on the edge at the
midspan
Defection=16.46 mm
≦ 18mm
PASS
The sample did not dislodge from the point of support
Requirement in AS/NZS 1577:2013
Load on the center of the midspan
Defection =17.28
≦ 18mm
The sample did not dislodge from the point of support
Requirement in AS/NZS 1577:2013


Strength Test
AS/NZS
1572013
Appendix B
Paragraph B4(a) to (e)
Permanent deformation
1.75 mm
≦ 3.6mm
PASS
Observation
1. The sample did not dislodge from the point of support
2. Plank does not show any visual signs of distress,bucking,and audible signs of distress
Requirement in AS/NZS 1577:2013
Load at failure
8.61 KN
≧4.84 KN
Mode of failure
The sample failed progressively and did not break into separate parts
Requirement in AS/NZS 1577:2013
OSHA board
Application
formwork scaffolding
plywood plank
planks
FAQ

1. who are we?
We are based in Shandong, China, start from 2022,sell to North America(40.00%),Southeast Asia(25.00%),South America(20.00%),Africa(15.00%). There are total about 101-200 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Adjustable Formwork Clamp, Formwork System, Scaffolding, Scaffolding Parts, Film Faced Plywood

4. why should you buy from us not from other suppliers?
Our core is integrating these formwork products to compose an optimium solution.  Our intelligent logistic net can deliver products timely & cost effectively.   Service team will follow all the way.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,EUR,CAD,GBP,CNY;
Accepted Payment Type: T/T,L/C;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian


Contact Us

微信图片_20240410164058

Cynthia Tian

E-mail: cynthiatian@zeemoform.com

WhatsAPP & Phone: +86 17661555056

Address: Linyi city, Shandong, China




Previous: 
Next: