English
English
产品1
You are here: Home / Formwork & Scaffolding Solution / Formwork System / Table Formwork / Shuttering Formwork Concrete Slab Formwork System for Office Building

Hot Products

CONTACT US

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Shuttering Formwork Concrete Slab Formwork System for Office Building

ZEEMO slab formwork is widely used in house floor slab pouring projects. This kind of formwork has the advantages of simple installation, modular operation, flexibility and convenience, high cost performance, and good concrete forming effect.
Availability:
Quantity:
Inquire Add to Basket

  • ZM-SF16

  • ZEEMO

Specification

Shuttering formwork concrete slab formwork system for office building

ZEEMO slab formwork is widely used in house floor slab pouring projects. This kind of formwork has the advantages of simple installation, modular operation, flexibility and convenience, high cost performance, and good concrete forming effect.
slab formwork
Length 
3300~5000 mm
Width 
2440~3600 mm
Thickness 
250~300 mm
Bearing Capacity 
7.8~9.1KN/sqm
Bearing Load of Lifting Fork 
10~15 KN
Bearing Load of  Shifting Trolley 
11~20KN

The standard size of slab formwork is 2440mmx4880mm.Other size can be customized according to your project.

Other tool used in the slab formwork:
1.Shifting Trolley
The shifting trolley is used to transport table molds on the same floor. It's consists of two parts, lifting part and power drive part. During transportation, the trolley is pushed to the center below the table mold, the hydraulic device is activated, the table mold is lifted up, and then shorten the length of the steel support. Destination, steps are reversed from before handling.After installing the fixed table, remove the trolley.
2.Lifting Fork
Lifting fork is used to lift table formworks up and down or from one floor to another.
Height: 644cm, Rated load :1t

When in use, two forks should be inserted between the main beams to ensure the stability of the mold. It is also possible to support the main beam, table formwork is placed horizontally, but this situation should be avoided as much as possible.

Contact Us




Previous: 
Next: 
concrete slab table wall steel formwork table concrete formwork table formwork system slab table formwork tukey slab table formwork timber beam construction shuttering formwork concrete slab slab formwork panel wisa
Copyright 2022 Shandong ZEEMO Construction Technology Co., Ltd. All Rights Reserver. Sitemap Supported