Availability: | |
---|---|
Quantity: | |
SW-09
ZEEMO
Tank Formwork / Curved Wall
Our Tank formwork is made of plywood, plastic coated face/back/edge. then
1) lightweight than steel,easy handling, quickly, save time and labour
2) lower cost
3) easy installation, easy dismantle
4) no need mold-release agent,water can clean, because surface is plastic.
5) nice finish ,no need re-work.
Installation:
1) shape fixed , no need calibrate onsite
2) place the parts on the ground, joint the parts by fasteners.
3) props and supports.
Thickness of Plastic 0.5mm
Packing:
Technical Data:
Testing items | Unit | Standard used | Tested value | |
Bonding quality | N/mm² | EN314 | 0.72 | |
Bending strength | Longitudinal grain | N/mm² | EN310 | 50.0 |
Cross grain | N/mm² | 40.2 | ||
Elasticity in bending | Longitudinal grain | N/mm² | EN310 | 5137 |
Cross grain | N/mm² | 3519 | ||
Bearing concrete pressure | KN | EN310 | 70 |
Tank Formwork / Curved Wall
Our Tank formwork is made of plywood, plastic coated face/back/edge. then
1) lightweight than steel,easy handling, quickly, save time and labour
2) lower cost
3) easy installation, easy dismantle
4) no need mold-release agent,water can clean, because surface is plastic.
5) nice finish ,no need re-work.
Installation:
1) shape fixed , no need calibrate onsite
2) place the parts on the ground, joint the parts by fasteners.
3) props and supports.
Thickness of Plastic 0.5mm
Packing:
Technical Data:
Testing items | Unit | Standard used | Tested value | |
Bonding quality | N/mm² | EN314 | 0.72 | |
Bending strength | Longitudinal grain | N/mm² | EN310 | 50.0 |
Cross grain | N/mm² | 40.2 | ||
Elasticity in bending | Longitudinal grain | N/mm² | EN310 | 5137 |
Cross grain | N/mm² | 3519 | ||
Bearing concrete pressure | KN | EN310 | 70 |