English
English
产品1
You are here: Home / Accessories / Scaffold Accessories / LVL Plank / High quality scaffolding board pine wood LVL plank

Hot Products

CONTACT US

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

High quality scaffolding board pine wood LVL plank

LVL (Laminated Veneer Lumber) is a kind of plywood which is made from Peeling or chipping veneers. After drying and gluing the veneers, we put all of them or most of them together transversely, then hot press them. If all of the veneers are put transversely, we call it LVL.
Availability:
Quantity:
Inquire Add to Basket

  • ZM-SP38

  • Zeemo

Specification
High quality scaffolding board pine wood  LVL plank

LVL (Laminated Veneer Lumber) is a kind of plywood which is made from Peeling or chipping veneers. After drying and gluing the veneers, we put all of them or most of them together transversely, then hot press them. If all of the veneers are put transversely, we call it LVL.
plank lvl
pine wood
scaffold plank
Size
Width 225 mm * Length: 500/1000/1500/2000/2500/3000/4000 mm
Thickness
38mm
Tolerance
+/-1mm
Core
pine,Larch
Glue emission level
Carb P2(EPA), E0,
Usage
scaffolding planks
Moisture Content
12%~15%
Product Description
scaffolding accessories

FEATURES
1.Flat, beautiful, Low moisture content, Without moldy effect;
2.High design values for bending, stiffness and shear strength ;
3.Resists shrinking, warping, splitting and checking ;
4.Ordinary nail assembly - installs as easily as ordinary lumber;
5.High strength-to-weight ratio - more than 40 stronger than solid sawn products

TEST RESULT
SPECIMEN SPECIFICATION
38*225*3048mm ( Thickness * Width * Length )
Test Item
Test Method
Test Result
Standard
Conclusion
Stiffness Test
AS/NZS
1572013
Appendix A
Load on the edge at the
midspan
Defection=16.46 mm
≦ 18mm
PASS
The sample did not dislodge from the point of support
Requirement in AS/NZS 1577:2013
Load on the center of the midspan
Defection =17.28
≦ 18mm
The sample did not dislodge from the point of support
Requirement in AS/NZS 1577:2013


Strength Test
AS/NZS
1572013
Appendix B
Paragraph B4(a) to (e)
Permanent deformation
1.75 mm
≦ 3.6mm
PASS
Observation
1. The sample did not dislodge from the point of support
2. Plank does not show any visual signs of distress,bucking,and audible signs of distress
Requirement in AS/NZS 1577:2013
Load at failure
8.61 KN
≧4.84 KN
Mode of failure
The sample failed progressively and did not break into separate parts
Requirement in AS/NZS 1577:2013
plywood plank
Application
lvl wood
LVL PLANK
Pine planks


Previous: 
Next: 
pines wood lvl pine timber planks lumber scaffolding board lvl timber beams LVL plank
Copyright 2022 Shandong ZEEMO Construction Technology Co., Ltd. All Rights Reserver. Sitemap Supported