How to calculate the amount of pan buckle scaffolding works

Regarding the disk buckle scaffolding project dosage algorithm, many construction software can't completely cover its calculation module, which brings some difficulties for the disk buckle scaffolding project dosage calculation. We have summarized some quick calculation methods through years of experience, and hope to help you quickly calculate the amount of plate buckle scaffolding works.

First, the building exterior wall scaffolding

The height of the standard double rows of external wall scaffolding is not more than 20 meters, and the longitudinal spacing of the double rows of scaffolding is generally designed to be 0.9 meters, with each layer of the operating platform full of footrests, and the outside of double guardrails and footrests, and the diagonal rods are designed according to the requirements.

Under such a premise, a conventional program in accordance with the standard requirements for the construction of double-row facade frame each square of scaffolding dosage in 27kg-28kg or so, so that according to the area of the building facade can be calculated by the area of scaffolding (such as the height of the facade of 10 meters, 8 meters long, the area of scaffolding is generally calculated according to the height of 10 meters * length of 10 meters, a total of about 100 square meters, the approximate amount of plate fastening frame of 27-28 tons or so) .

However, the length and height of the external wall varies, so it is important to know whether the height of the external wall is too high or too low, so that there will be a certain amount of error.

Second, the full-room shelf for internal installation

The internal installation of full-height racks generally will not be set up for each layer of the operating platform, will be set up in a specific place of one or more layers of platforms, full-height racks of the structure of the 1.8 meters * 1.8 meters is the main part of the lower part of the channel will be set up 1-2, full-height racks are generally calculated in accordance with the m ³.

So we only need to know the number of cubic meters of the erection part, the usage of each cubic meter of a regular requirement of full-height rack is about 13kg-15kg (the usage of a 100m³ full-height rack with plate fastened frame is about 13-15 tons).

Third, supporting mold frame

Supporting frame generally do not need to set up operating platforms, up and down channels, etc., the structure of the supporting frame is generally 900 * 900 or 1200 * 1200.

We use 900 * 1200 parameters to calculate, also according to the cubic to calculate the amount of supporting frame in 17-19kg/m³, know the number of cubic supporting frame can also be estimated after the amount of plate buckle frame.