Adjustable square column clamp solves the big problem of building reinforcement

The square column formwork clamp is a special customized matching clamp corresponding to the fixed square column formwork. The shape is composed of a single piece of galvanized card board corresponding to four elbows. hole.

The wedge-shaped fixing whistle passes through the through hole and the fixing hole to fix the limit sleeve and the clamping plate to form a square column fastener that is convenient for installation and disassembly.

The most worrying thing for construction workers is the reinforcement of the formwork. Before the reinforcement of the formwork, it takes a long time to prepare the material, sawing the wood, arranging the frame pipe, finding the screws, etc., all ready to start the next step of the reinforcement work. Then, when reinforcing, at least two or three workers are required to work together, and the cost of building materials and labor is very high.

If the worker's skills are not good enough, mistakes are likely to occur. Once the error is large, it is easy to run out and leak the slurry when pouring concrete, or the cracks in the pillars and the traces of the formwork joints after demoulding are obvious.

But after using the square column reinforcement, these problems can be well avoided. The square column fastener can fasten the square column building formwork, the fastening effect is good, and the structure is simple and reasonable; the adjustable limit sleeve cooperates with the use of the fixed pin, which can adjust the fixed size and is suitable for the construction of square columns of different sizes. , convenient and practical, and reduce costs.

The structure of the square column clamp is simple and scientific, and the parts are matched. There is no need to prepare other materials in advance, and the preparation time is greatly reduced. Installation is very simple, saving time, effort and cost.